Job Requirements:

1. Bachelor degree or above, major in science and engineering;

2. English for business communication is preferred;

3. Familiar with 16949 project management process and five major tools.

Job Responsibilities:

1. Responsible for the formulation of quality objectives, quality planning, project risk identification and promotion in the early stage;

Participate in each node review of the project and supervise the quality of the red line node review of the project.

Responsible for improving the quality of the sample before SOP; Responsible for process anomaly analysis, statistics, improvement and promotion of closed loop work.

Responsible for the internal audit planning and implementation of the project process.

Responsible for customer audit response, audit problem tracking closed loop.

Responsible for sample customer complaint response.

Working Place: Shaoxing,China.

Job Requirements:

1. Bachelor degree or above, major in science and engineering;

2. English for business communication is preferred;

3. Familiar with 16949 project management process and five major tools.

Job Responsibilities:

1. Responsible for the formulation of quality objectives, quality planning, project risk identification and promotion in the early stage;

Participate in each node review of the project and supervise the quality of the red line node review of the project.

Responsible for improving the quality of the sample before SOP; Responsible for process anomaly analysis, statistics, improvement and promotion of closed loop work.

Responsible for the internal audit planning and implementation of the project process.

Responsible for customer audit response, audit problem tracking closed loop.

Responsible for sample customer complaint response.

Work Location: Hangzhou,China.

Job Requirements:

1. Bachelor degree or above, major in science and engineering;

2. Foreign customers require English to be used for work communication, but domestic customers have no requirement;

3. Be responsible and customer-oriented; Responding to customer demand, able to work under pressure;

4. Familiar with APQP and PPAP development process and management;

5. It is preferred to independently lead projects from project initiation to mass production;

6. pmp certificator is preferred, Prince2 certificator is preferred.

Job Responsibilities:

1. Responsible for the whole process management from project start-up to project SOP and climbing to final acceptance;

2. Determine the work content and breakdown structure of the project, develop and implement the project schedule plan, effectively monitor the progress, quality, cost, risk and income, etc.;

3. Maintained communication with customers, actively responded to customer needs, assisted the team to obtain customer input and output, regularly updated the project progress and made it meet customer development requirements;

4. Coordinated various required resources in the process of project promotion, familiar with the application of PDCA to complete cross-department collaboration and corresponding activities, and promoted the normal progress of the project;

5. Cooperate with superior leaders to complete department construction and management.

Work Place: Shaoxing,China.

Job Requirements:

1. Bachelor degree or above, major in science and engineering;

2. Foreign customers require English to be used for work communication, but domestic customers have no requirement;

3. Be responsible and customer-oriented; Responding to customer demand, able to work under pressure;

4. Familiar with APQP and PPAP development process and management;

5. It is preferred to independently lead projects from project initiation to mass production;

6. pmp certificator is preferred, Prince2 certificator is preferred.

Job Responsibilities:

1. Responsible for the whole process management from project start-up to project SOP and climbing to final acceptance;

2. Determine the work content and breakdown structure of the project, develop and implement the project schedule plan, effectively monitor the progress, quality, cost, risk and income, etc.;

3. Maintained communication with customers, actively responded to customer needs, assisted the team to obtain customer input and output, regularly updated the project progress and made it meet customer development requirements;

4. Coordinated various required resources in the process of project promotion, familiar with the application of PDCA to complete cross-department collaboration and corresponding activities, and promoted the normal progress of the project;

5. Cooperate with superior leaders to complete department construction and management.

Work Location: Hangzhou,China.

Job Requirements:

1. Bachelor's degree or above, with experience in mass production parts development in automotive industry, any of the following product development experience is preferred;

-- Experience in automotive air-conditioning/refrigeration system component development

-- Experience in automotive power or transmission (cooling) system product development

-- Automotive electronic water pump oil pump or water valve product development experience

-- Experience in product development of new energy vehicle thermal management system components

2. Have basic theoretical knowledge of mechanical drawing (including size standard, GD&T, etc.), and can skillfully make 2D drawings according to 3D; Proficiency in Catia or SolidWorks.

3. Familiar with TS16949, familiar with APQP, FMEA, ControlPlan, PPAP and other tools for project development and management;

4. Basic knowledge of mechanical theory, mechanical design, engineering material mechanics, etc.;

5. Proficient in Excel, PowerPoint, Word and other office software.

Job Responsibilities:

1. Completed the research and development of thermal management integrated components according to the R&D requirements of the company's product technical route;

2. Design and continuously optimize the standardized component library of enterprise-level integrated components based on the company's internal product development technology requirements;

3. Responsible for product development/design, including: preliminary planning, 3D/2D production, arrangement of parts trial production,DV design verification, and analysis of test results;

4. In the process of development, responsible for communicating with customers, suppliers and internal horizontal departments, and solving technical problems in the process of development;

5. Regularly report the work and the development progress of the project to the superior, and assist the project team in stage review and other work.

Work Location: Hangzhou,China.

Job Requirements:

1, Education: full-time bachelor's degree (including fresh, mechanical major or industrial engineering);

2. Capable of using SolidWorks, UG, CATIA and other 3D modeling software to design 3D structure and output 2D products; Familiar with common office software;

3, familiar with gage design, tooling design, testing experience is preferred

4. Experience in auto parts design is preferred; experience in heat exchanger products is preferred;

5. Strong sense of responsibility, strong executive ability, strong communication and understanding ability, team spirit, can work under strong pressure.

Job Responsibilities:

1. Responsible for the structural design, 3D drawing, 2D drawing and BOM preparation of related products of heat exchanger

2. Organized manufacturing feasibility and assembly analysis and design review

3. Participated in product assembly, trial production and verification, and summarized excellent experience;

4. Responsible for failure mode analysis and structural design optimization in the process of product verification, and participate in technical research.

Work Place: Shaoxing,China.

Job Requirements:

1, Education: full-time bachelor's degree (including fresh, mechanical major or industrial engineering);

2. Capable of using SolidWorks, UG, CATIA and other 3D modeling software to design 3D structure and output 2D products; Familiar with common office software;

3, familiar with gage design, tooling design, testing experience is preferred

4. Experience in auto parts design is preferred; experience in heat exchanger products is preferred;

5. Strong sense of responsibility, strong executive ability, strong communication and understanding ability, team spirit, can work under strong pressure.

Job Responsibilities:

1. Responsible for the structural design, 3D drawing, 2D drawing and BOM preparation of related products of heat exchanger

2. Organized manufacturing feasibility and assembly analysis and design review

3. Participated in product assembly, trial production and verification, and summarized excellent experience;

4. Responsible for failure mode analysis and structural design optimization in the process of product verification, and participate in technical research.

Work Location: Hangzhou,China.

Job Requirements:

1. Bachelor degree or above, major in mechanical science and engineering is preferred, experience in related projects is preferred, experience in team building is preferred, experience in quality system PPAP/APQP process is preferred;

3 to 5 years experience in supporting parts or assembly process in engineering or manufacturing industry, must be skilled in SPC and data analysis; 3.

3. Knowledge of tooling, processing and visual inspection of welding, injection molding, forging, casting, extrusion and machining parts, as well as knowledge of automatic production equipment;

3. Cet-6 or above, good listening, speaking, reading and writing skills;

4. Good communication skills, strong ability to work under pressure and adapt to business trips.

Job Responsibilities:

1. Plan, organize, direct and implement production process development of thermal management related components and equipment, including risk identification, quality control, cost reduction and capacity improvement;

2. Plan and execute the development, management, review, improvement and correction of thermal management-related components, assembly and manufacturing technology and quality control process from the pre-development stage of the project to the mass production stage;

3. Lead, follow up and improve the introduction of manufacturing process and new product development, cost and quality improvement;

4. Responsible for the audit of the production line to ensure that the parts performance, delivery and reliability expectations are met;

5. Promoted the communication between customer SIE team and internal departments, clarified technical requirements, and improved customer satisfaction, etc.

Work Location: Hangzhou,China.

Job Requirements:

1. Bachelor degree or above, science and engineering is preferred, CET-6 or BEC Business English Intermediate level is preferred.

2. Have a certain knowledge of etiquette, marketing skills and financial knowledge.

3. Have a strong sense of service and can work under pressure.

Job Responsibilities:

1. Existing market maintenance: timely follow up customer demand to ensure existing business volume; Maintain daily contact with customers to ensure smooth communication.

2. Handling daily business work: responsible for the completion of monthly sales plan and fund recovery plan of target customers; Make, implement and follow up work plan and work summary; Make stock plan and follow up the completion of plan and delivery in time.

3. Acquisition and promotion of new projects.

4. Handling and following up quality problems.

5. Responsible for coordinating the horizontal department to receive customer reviews and visits.

6. Complete other work arranged by the leader.

Work Location: Hangzhou,China.

Job Requirements:

1. College degree or above

2. Understand manufacturing process and supply chain management, more than 1 year working experience

3. Have strong data analysis ability, proficient in using EXCEL office software and ERP system

4. Strong leadership, communication and coordination skills, judgment and decision making skills, planning and execution skills, unexpected and rapid response ability

Job Responsibilities:

1. According to the combination of client order & forecast and internal capacity, identify the changes of order forecast and potential risks & capacity problems, give internal warning and feedback the capacity problems to relevant departments, and continuously follow up the solutions and improvement countermeasures

2. Audited MPS entry plan, communicated and coordinated abnormal orders

3. Link up the whole production process with delivery as the guidance, update and reply the delivery date of orders according to the client demand nodes, coordinate and give feedback on anomalies

4. Historical data and order analysis management, WIP inventory control, analysis and follow-up processing

5. Audited the batch production orders of the project, promoted the rectification of the unfinished items and closed the tasks

6. Plan coordination and support for sample delivery in the early stage of mass production (development stage)

Work Location: Hangzhou,China.

Job Responsibilities:

1. College degree or above

2. More than 1 year working experience in process

3. Familiar with TS16949

4. Familiar with five tools and developed analysis software

5. Proficient in Office software and CAD drawing;

6. Have simple English reading and writing ability. Able to read English emails and reply to simple emails; Ability to translate process documents for foreign customers

7. Ability of cross-departmental communication, teamwork and problem solving

Job Requirements:

[Product Project Development]

1. Organized and implemented the preparation, improvement and update of process documents for EXV products of the business department;

2. Organized and implemented the process development and design of EXV products of the business division, and ensured that the new equipment, tooling, production line, logistics layout and operation mode met the approval of internal and external customers.

3. Participate in EXV tooling design, debugging, tooling acceptance, and continuous improvement; Debug and verify the new equipment or production line after arriving at the site, arrange trial production and improve the problem promotion and acceptance;

4. Organized the implementation of EXV process PPAP files (PFDPCPPFMEA layout plan tooling list Capacity analysis and error prevention list) and completed the acceptance of new tooling and equipment for various process verification;

【 Process Improvement 】

1. Organized and implemented timely analysis and handling of problems in the EXV production process, proposed improvement methods and implemented, tracked and coordinated;

2. Organized and implemented the process improvement of EXV products to improve product production efficiency;

3. Participate in the implementation of technical transformation projects of the business department and IE engineering projects;

4. Organize EXV process optimization and transformation, and make process improvement or site transformation of existing process or equipment according to the latest needs or quality accidents;

【 Routine work 】

1. Responsible for the formulation, inspection and summary of monthly and weekly plans of EXV group of the department and the review of special promotion plans of each project;

2. Responsible for the training of EXV process engineer's professional knowledge and process experience;

3. Organize regular monthly process discipline inspection according to process discipline inspection system;

4. Completed temporary tasks assigned by superiors and assisted other colleagues to deal with the work of the department;

5. Maintain good communication with all departments of the business department;

6. Make regular work summary, report the work progress and work plan to the supervisor, and explain the work that needs to be assisted to complete

7. Provide work guidance, inspection, supervision, evaluation and feedback to direct subordinates;

8. Selected, trained and developed direct subordinates;

9. Fulfill the information security and confidentiality obligations as required by the confidentiality commitment.

Work Location: Hangzhou，China.

Job Requirements:

1. Bachelor degree or above, major in electronics or mechanical engineering;

2. Proficient in professional design software such as Solidworks;

3.3-5 years working experience in process, have certain non-standard equipment automation production line. Mechanical hand. Visual inspection. AGV and other process experience;

4. Good communication skills, organization and coordination skills and teamwork skills.

Job Responsibilities:

Project Development:

1. Participate in the feasibility analysis of new product development projects and provide process support;

2. Responsible for process arrangement and capacity analysis in the early stage of new project development, and provide process support;

3. Participated in the optimization of process layout and prepared the optimization planning scheme of process layout

4. Take charge of new equipment. Validation and formulation of new tooling, process parameters and other process requirements;

5. Responsible for the preparation of relevant process documents (flow chart PFD. Control plan CP.PFMEA. Site layout. Capacity analysis report. Work instructions, etc.);

6. Responsible for product PPAP. External audit and customer response.

Production line optimization class:

1. Responsible for process verification related to product performance timing adjustment, tooling optimization and improvement;

2. Responsible for on-site process maintenance and execution supervision and inspection to avoid process quality accidents;

3. Responsible for the process technology training of workshop staff.

Exception handling class:

1. Participate in on-site production anomaly handling and QRQC problem discussion organized by quality department, and provide process support;

2. Participate in the analysis and review of customer complaints related to product quality and process.

Work Place: Shaoxing，China.

Job Requirements:

1. Bachelor degree or above in mechanical engineering. Electrical, automation or related major

2. At least 2 years process related work experience, assembly. Experience in assembly process and non-standard production line is preferred;

Job Responsibilities:

1. Made the plan of the new production line, and participated in the development and tracking of the project schedule of the new production line; Responsible for new product process planning, equipment requirements, complete product performance related process test;

2. Responsible for the countersigning of new product drawings and the design of process tooling for batch trial production of new products, and improving the trial production report and related process data;

3. Prepare PFEMA process flow chart. Control plan and operation instruction and other process documents. Develop process equipment according to process requirements and be responsible for process equipment validation and improvement work;

4. Responsible for process optimization and improvement (OEE. Productivity. Improve equipment capacity and production capacity), and constantly improve the level of process technology to reduce scrap. Reduce the operation personnel, etc.

5. Develop and promote tooling preventive maintenance plan. Tooling is regularly checked and measured. Tooling spot check and self-maintenance. Tooling maintenance instructions and other documents;

6. Solve. Analyze the process problems in the production process and assist to solve the problems in the production line. Product complaints;

7. Cooperate with relevant departments for investigation. Analyze and improve quality problems related to production;

8. Production and operation personnel training: 1. Staff coaching; 2. Internal training; 3. Finish other work assigned by superior on schedule

Work Place: Shaoxing，China.

Job Requirements:

1. At least 1.5 years working experience, at least 3 years quality management experience in automotive industry;

2. Familiar with IATF16949 quality system;

3. Proficient in office software, especially Powerpoint and Excel;

4. Proficient in applying five quality tools to solve quality problems;

5. Proficient in dealing with all kinds of parties and audit, master the audit and audit skills;

6. Good team work ability. Ability to solve problems quickly. The ability to withstand pressure;

7. Have IATF 16949 internal auditor qualification certificate. VDA 6.3 Auditor Certificate.

Job Responsibilities:

1. Participate in and guide the solution, rectification and verification of product and process quality problems in the production stage;

2. Organize horizontal department quality meeting and research. Analyze major quality problems, implement responsible parties, issue quality improvement countermeasure report, follow up the improvement effect of relevant quality corrective and preventive measures;

3. Promote the standardized establishment of workshop quality problem handling process (quality problem escalation mechanism. QRQC, etc.), promote the continuous improvement of process quality problems and achieve quality control objectives;

4. Participate in the review and planning of the control plan. Implement the process quality management plan, ensure the standardization and orderly implementation of the process quality control method;

5. Work in process. Formulation of quality inspection specifications for finished products.

Work Place: Shaoxing，China.

Job Requirements:

1. Bachelor degree or above, major in mechanical or quality management, good English listening, speaking, reading and writing skills;

2. At least 2 years working experience in process quality control or supplier quality management in automotive industry;

3. Familiar with TS16949 quality management system and various tools and methods of process quality control;

4. Be honest and trustworthy.

Job Responsibilities:

1. Establishment and maintenance of IATF16949 system;

2. Organize and cooperate with the audit work;

3. Audit result tracking: ensure the effective improvement of nonconforming items;

4. System operation management: assisted the management agent in formulating system policies according to the company's development strategy. Target, guide and supervise the standardized management of all functional departments' system action flow, form records, etc.

5. Improvement of system data; Liaison with external agencies; Training; Management of document control center; Collect and update relevant information required by customers (related quality assurance agreement and environmental protection agreement, etc.).

Work Place: Shaoxing,China.

Job Requirements:

1. Bachelor degree or above

2. Familiar with SPC.QC.ISO9001, ISO1400; Familiar with ISO/IATF16949 (9001) related knowledge;

3. Have received professional training such as IATF16949.VDA6.3. Have the relevant internal audit certificate;

4. Other requirements: good leadership, organization and coordination ability; Good communication and presentation skills; Ability to organize and control work;

Job Responsibilities:

1. Establishment and maintenance of IATF16949 system;

2. Organize and cooperate with the audit work;

3. Audit result tracking: ensure the effective improvement of nonconforming items;

4. System operation management: assisted the management agent in formulating system policies according to the company's development strategy. Target, guide and supervise the standardized management of all functional departments' system action flow, form records, etc.

5. Improvement of system data; Liaison with external agencies; Training; Management of document control center; Collect and update relevant information required by customers (related quality assurance agreement and environmental protection agreement, etc.).

Work Place: Shaoxing，China.

Job Requirements:

1. College degree or above, more than 5 years experience in die casting mold design;

2. Able to apply mold development software (AutoCAD, UG);

3. Strong sense of responsibility, pioneering and innovative, good organizational ability, communication and coordination ability;

4. Preferred to independently complete the mold design of high vacuum die casting structural parts (complete mold design for more than 3 years).

Job Responsibilities:

1. Responsible for the planning and technical support of mold design schemes in the early stage of product development;

2. Responsible for the early stage of product development and mold pouring and scheduling system. Three-dimensional structure design, mold flow analysis;

3. Responsible for the review and formulation of the project mold process;

4. Responsible for following up mold development progress. Exception handling and mold acceptance work;

5. Handled and solved technical problems of products, and improved the production process in production. Die casting mold and ensure the stability of production.

Work Place: Shaoxing，China.

Job Requirements:

1. College degree or above, related major; At least 5 years industry experience

2. Familiar with environmental engineering. Fire. Safety. Occupational health related knowledge

3. Good communication skills. Coordination ability;

4. Safety Officer certificate or Certified Safety Engineer certificate is preferred.

Job Responsibilities:

1. Responsible for the management of factory production safety, publicity of safety culture and investigation of accidents. Treatment and rectification;

2. Responsible for the management of the factory environment, and the environmental assessment and acceptance of new projects;

3. Responsible for the occupational health of the factory, set up the ledger and carried out the health inspection;

4. Responsible for the fire management of the factory, the inspection of various fire fighting facilities, and the organization of fire drills.

Work Place: Shaoxing,Chian.

Job Requirements:

1. Bachelor degree or above;

2. Proficient in finite element analysis tools, capable of conducting complete electromagnetic. Simulation analysis of temperature, vibration and noise

Job Responsibilities:

1. Electromagnetic of permanent magnet motor. Temperature. Noise simulation design;

2. Design reduction and process improvement of permanent magnet motor;

3. Fault analysis of permanent magnet motor;

4. Communicated with customers, solved customers' problems and needs, provided solutions and made decisions on technical solutions.

Work Location: Hangzhou,China.

Job Requirements:

1. Bachelor degree or above, major in mechanical engineering;

2. More than 5 years of team management experience;

3. Automotive industry experience, more than 10 years of design experience.

Job Responsibilities:

1. Responsible for customer demand analysis, output of technical index conformity matrix, and product scheme design;

2. Responsible for product scheme implementation, structural design, drawing output, drawing proofreading, product verification, DFMEA document output and technical standard preparation;

3. Responsible for product iteration, relevant technical innovation and priority;

4. Responsible for product cost, performance and manufacturability.

Work Location: Hangzhou，China.

Job Requirements:

Hardware Engineer (Automotive Air Conditioning) :

Bachelor degree or above in electronic control major, more than 5 years experience in air conditioning controller development, familiar with automotive electronic hardware development.

Hardware Engineer (Electronic Water Pump direction) :

1. Familiar with DC brushless motor driver hardware design, bachelor degree or above, more than 5 years of hardware development experience;

2. Familiar with device selection and reading comprehension of Datasheet, rich experience in PCB layout and EMC design;

3. Familiar with product development process, good communication skills, strong hands-on ability and on-site problem solving ability;

4. Familiar with automotive electronic standard and hardware designer is preferred.

Job Responsibilities:

1. Responsible for the research and development of air conditioning controller;

2. Responsible for the hardware schematic design of automotive mechatronics. PCB cloth board. Hardware testing;

3. Responsible for PCB device selection and welding and debugging of manual sample devices in the early stage;

4. Participated in the whole machine performance test and type test electronic control related content test;

5. Responsible for the archiving of hardware related design data of developed products;

Work Location: Hangzhou，China.

Job Requirements:

1. Master degree or above;

2. Electrical. Electronic. Automation. Mechanical and electrical major;

3.3 At least 1 year working experience in embedded software development and 1 year working experience in motor drive development;

4. Proficient in embedded C/C++ programming. Familiar with SCM knowledge;

5. Master at least one motor control technology;

6. Familiar with at least one car bus knowledge, such as CAN.LIN, etc.;

7. Experience in Aspice process;

8. Familiar with automotive MISRA C programming specifications;

9. Basic command of English, able to communicate simply;

Job Responsibilities:

1. Responsible for software development of auto parts;

2. Participated in C language product application code design. Product software architecture design;

3. Completed the design of the corresponding module software according to the development schedule and task allocation. Development. Programming tasks;

4. Responsible for analyzing and solving problems in project development;

5. Responsible for writing software requirement documents. Architecture proposal document. Design document;

6. Participated in the debugging of the whole machine product and solved related problems;

7. Timely delivery of customer demand control box software.

Work Location: Hangzhou，China.

Job Requirements:

1. Bachelor degree or above in vehicle engineering. Quality and safety. Refrigeration or HVAC related major;

2. Familiar with IATF16949 quality system requirements, master APQP.FMEA.SPC.MSA.PPAP five manuals and 8D;

3. 1-3 years working experience in automotive industry, with IATF16949 and quality management training experience is preferred.

Job Requirements:

1. Responsible for the company's production and R&D materials, including outsourced parts. Semi-finished products. Finished product quality control, responsible for quality record management;

2. Organize the project. Production materials include external parts. Semi-finished products. Quality acceptance criteria for finished products. Sampling standard;

3. Responsible for the management of the company's measuring instruments, including marking. Calibration. Operational training. Account registration, etc.; Ensure reliable operation of measurement system (MSA);

4. Organize the processing of customer feedback quality information including answers. Cause investigation. Formulation and implementation of improvement measures (8D);

5. Responsible for collecting laws, regulations and standards related to quality management of the company, sorting out marks and filing.

Work Location: Hangzhou，China.

Job Requirements:

1. Bachelor degree or above in vehicle engineering. Quality and safety. Refrigeration or HVAC related major;

2. Familiar with IATF16949 quality system requirements, master APQP.FMEA.SPC.MSA.PPAP five manuals and 8D;

3. 1-3 years working experience in automotive industry, with IATF16949 and quality management training experience is preferred.

Job Responsibilities:

1. Responsible for the inspection and feedback of the improvement effect of customer quality complaints.

2. Responsible for product customer quality information processing:

2-1 Responsible for customer feedback quality information and returned products confirmation processing;

2-2 Responsible for the preliminary investigation of customer feedback adverse information and organize relevant personnel to analyze;

2-3 Responsible for the closed-loop management of customer feedback quality information countermeasures;

2-4 Responsible for the summary of customer feedback adverse information, and inform the relevant departments of the summary results.

2-5 Responsible for the regular inspection of customer feedback adverse information countermeasures.

2-6 Responsible for customer feedback quality problems after the implementation of relevant content training.

3. Responsible for the transmission and control of customer feedback quality information.

4. Convey the voice of customers and participate in the quality awareness of assembly shop staff. Quality system training and promotion;

5. Fulfill the information security and confidentiality obligations as required by the confidentiality commitment.

Work Location: Hangzhou，China.

Job Requirements:

1. Bachelor degree or above, materials. Machinery. Heat transfer. Molds. Automation or related major;

2. Assembly process, injection molding process, automotive parts industry related work experience;

3. Understand plastic materials; Proficient in professional design software: Solidworks.CAD, etc.

Job Responsibilities:

1. Responsible for the preparation, maintenance and update of process documents; Responsible for continuous improvement of each process;

2. Responsible for process development of new projects. Manufacturability analysis;

3. Support sample production. Summarize and lead to solve all kinds of problems in sample production;

4. Responsible for the improvement of product process, improve product production efficiency and qualified rate;

5. Responsible for design, follow-up test verification and completion of summary report;

6. Participate in on-site quality problem and defective product analysis. Improve program verification;

7. Participate in tooling and equipment design. Review and acceptance review.

Work Location: Hangzhou，China.